Useful links concerning Sapphire Plus printer
Issues with building the printer:
- Sapphire Pro issues by Korbinian Heel
Reviews
- My review
- CNC Kitchen review of Sapphire Pro by CNC Kitchen
- Sapphire Plus review by 3DPrintBeginner
Detach and swap your hotend on your 3D printer
Sapphire Plus swappable hotend
If you have read my previous posts about replacing the hotend, you've probably already realized that changing the hotend is a tedious work.
Most of the difficulties comes from:
- Wiring the new hotend and sensors...
Review of Two Trees's Sapphire Plus Core XY 3D printer
I've decided to buy this 3D printer because it looked strong and solid and well designed. I'm not going to copy all the caracteristics for this printer here, as you'll probably find a lot more on the original manufacturer website.
You'll...
Replacing the hotend with an E3D
The provided hotend for the Sapphire Plus 3D printer is average. It's not correctly cooled, so it'll fit for PLA well, but it'll be less efficient for PETG. I haven't tried ABS with it. Also, the provided teflon tube has an hole that's too large for the filament...
Advanced debugging of MKS Robin Nano (STM32) board
If you need to debug your printer's firmware, you've probably read my previous post already. If not, I advice you to read it.
This post is about solving the remaining issues and/or shortcomings with the debugging so that a debugging session is...
